V22 CADCAM 2D/3D software affordable Gcode CadCam Powerful Toolpath

Since 1985 BobCAD-CAM software has been dedicated to providing manufacturers just like you with powerful and easy to use software.

Boeing
Bosch
Smith & Wesson
NASA
Ford
Harley Davidson
Honeywell
Lockheed Martin
Disneyland Inc
University MI
University ID
University OH
University FL
UCLA
UCF
Florida Tech
Tufts University
University of Texas
USA Luge’s Team

Along with over 25,000 more satisfied BobCAD-CAM users.

We look forward to helping you make chips out of the competition!
BobCAD-CAM

"Thank you for a very efficient and informative demo of Bobcad 2007. I find the new user interface for machining the most intuitive and best I have evaluated. The simplicity is deceiving. The amount setup flexibility and machining technology is superb.
The seamless interface to Rhino will be a great asset in our currently developing new approach to three dimensional CAD/CAM.
Best regards,
Max Waddoups
Strayer Voigt, Inc.

"We recently received an IGES file with special 3D curves on it with Engraving. In the past we would have had to have sub-contracted this work out, but thanks to the Bob CAD CAM software we were able to create all the 3D curves with skins on and generate programs for them, and also cut the necessary engraving for this type of work. We have just completed the job, and have found the shut off zones in the plastic to be absolutely perfect. In fact, in my 25 year career, I've never had these shut-off zones so good. We are ecstatic with the results and very excited with our BobCAD package. Please, if there are any further developments with this CADCAM package, please contact us."
Thank you once again,
Russell S.

Untitled Document

CAD Features

NEW V23 brings you a wide range of major enhancements in CAD Design. The new system look and feel is not only easier to work with; it raises the bar in methods used in CAD design. Manage your jobs from start to finish has never been so simple.

Download a free demo and see for yourself why this will be one of the easiest decisions you will ever make for the future of your shop!

Surface & Solids from Text New Surface Extend New Dimension Point Text & Geometry Projection New Surface Intersection Curves Geometry & Solids Editing Geometry Editing More Info New Contour Creation Part Dimensioning Spline Construction New Circle From Two Points New DXF/DWG Paper Space Read	2D & 3D Wireframe Construction New Contour Creation New Deform Function New Point Styles More Info Primitive Solids for Modeling New Rotate Around 3D Line Hole Pattern & Gear Construction Solid, Wireframe & Transparent Viewing New Un-trim Surface New Fillet Between Surfaces	New Roller CAM New Spline Blended Geometry Verification Geometry & Solids Editing New Auto Arc Fit New Break Surface Free-Form Surface Creation Layer & User Coordinate System manager
File Import: SolidWorks .sldprt, AutoCAD .DWG, DXF, RhinoCAD .3dm, IGES, STEP, STL, SAT, Parasolids X_B & X_T & .cad (BobCAD V21 files).

CAD Design Enhancements:

Sprocket: This feature allows the user to create a Sprocket based on user input for Number of Teeth, Roller Radius and Pitch.

Blended Spline: This feature allows the user to generate a Spline that may be made tangent to other entities in the workspace.

Arc Fit: This generates arcs from a series of selected lines in the workspace based on the user input for tolerance.

Break Surface: Cuts/Removes pieces of surfaces using Wire frame geometry

Un-trim Surface: Replaces the pieces of surfaces removed using the Break Surface feature.

Fillet Between Surfaces: Allows the user to create a Surface Fillet between two surfaces that do not share a common edge.

Surface Extend: Allows the user to extend a surface a specific distance

Dimension Point: Allows the user to dimension a point giving the X, Y and Z locations

Rotate Around 3D Line: Allows the user to rotate an entity or group of entities around a 3-dimensional line formed between two snap points or specified locations.

Surface Intersection Curves: Allows the user to create a wire frame chain using the intersection of two surfaces.

Circle From Two Points: Allows the user to create a circle by using two reference locations that determine the diameter of the circle.

DXF/DWG Paper Space Read: Allows the user to import the Paper Space during the import of DWG and DXF files.

Contour Creation: It is now possible to create Contours and specify whether you want the longest entity to be the first entity in the chain or the selected entity. You can also specify the directio0n of the contour as it is being created.

Deform: The Deform Function now works with Spline geometry, allowing you to select positions on the Spline and modify their position.

Roller CAM: This feature allows the user to create a roller CAM shape based on user inputs for Rise, Fall and Dwell Size and Duration.